CFR

The Cheetah Factory Racing Moto Bar Pad‚ is designed to fit the CFR Hard Enduro Moto Bars. The Dual density foam will protect against sharp corners...

The CFR Knucks Handlebar risers are ideal to personally customize the height of your snowmobile handlebars. Machined from Hi-Strength super tough 6...

  The CFR Brett Turcotte Handlebar is the handlebar of choice for Brett and his mind-blowing snowmobile skills. From the snowcross track to the bac...

  The CFR Boondocker Handlebars 2.0 are bent as an all-around Boondock, hill climbing, jump and tandeming handlebar. The 38° angulation on the end ...

The CFR bar pad‚ is designed to fit all CFR Handlebars or any oversized large diameter Handlebars. The Dual density foam will protect against sharp...

We are proud to introduce the new CFR Signature Grip Snowmobile Handlebar Grip featuring raised logo graphics that provide superior grip and comfor...

The Boardski Bracket Kit can carry one snowboard or one pair of skis and poles on the side of the DD, iRack or Mountain Rack. It's the go to bracke...

The CFR Crow Bar Snowmobile Handlebars are a non-oversized 7/8" diameter snowmobile handlebar from end to end. No different riser or adapter needed...

The CFR Board-Ski Direct Tunnel Mount can carry one snowboard or one pair of skis and poles on the side of the DD, iRack or Mountain Rack. It's the...

The CFR Snowboard/Pow surf bracket is a result of a direct collaboration with Jeremy Jensen at Grassroots pows surfing and CFR. Jeremy needed a rac...

The CFR Dime Bag was designed by Birkin, BC Canada based FYI designs. Tom Routh head designer/snowboard legend/sled/moto head wanted a waterproof a...

The snowmobile Snowboard rack that is tested and approved by professional snowboarders Travis Rice, Mark Carter, Mark Landvik and Helen Schettini. ...

The new Cheetah Factory Racing Boardski Bracket 2.0 has been totally redesigned to create the ultimate snowboard or ski carrier for your snowmobile...

The new CFR Rigid Mountain strap allows a solid grab handle for tricky maneuvers and tandem snowmobiling. The bar clamps have been slimmed down so ...

The CFR 29ER is the newest bar in our 7/8" diameter line up. With an overall width of 29" and a 12 degree pullback the 29ER bar will help you navig...

The newly designed Caleb Kersterke handlebar is Caleb’s design from end to end. The Small diameter grip (SDG) area allows added grip strength to ge...

The new CFR Hard Enduro bar is designed to be able to take anything you can throw at it. Made from 7075 aerospace aluminum that is both strong, yet...

Features 5-1/2" tube converts stock flat style steering post to a pivot style steering post when using a pivoting style handlebar riser. Super str...

Features Made from 7075 Heat treated super Aluminum with flex technology. Strong, Light weight and built to last!*Better positioning than stock b...

The CFR Snow Scraper is a great way to scrape off unwanted snow and ice from your running boards, Snowboards or Skis.

The CFR replacement strap comes in 8" and 16" lengths and is used in all of the snowboard and ski rack carrying racks that we manufacture.‚ A 64 St...

The CFR Oversized Bar Adapter is a universal adapter that allows oversized 1 1/8" snowmobile handlebars to be fastened to your stock 7/8" Snowmobil...

Andrew had been cutting downs his Boondockers to a 29" width and asked if we could make him a custom bar so he didn't have to cut his bar down. We ...

The snowboard rack tested and approved by snowboarders Eric Jackson, Bjorn Leines and Mads Johnson. The Metal snowboard rack System is one of the l...

The newly designed CFR bar pad has a sleeker, meaner and softer design to fit all CFR handlebars or any oversized large diameter handlebars. The du...

The CFR Aluminum Ratchet is custom made to take the abuse that snowmobiling throws at it.‚ These custom-made ratchets are designed to hold your sno...