CFR

  The CFR Boondocker Handlebars 2.0 are bent as an all-around Boondock, hill climbing, jump and tandeming handlebar. The 38° angulation on the end ...

Designed to fit snug between the bar clamps of most dirt bike oversized handlebars. The softer durometer rubber will soften the blow of an unexpect...

The CFR bar pad‚ is designed to fit all CFR Handlebars or any oversized large diameter Handlebars. The Dual density foam will protect against sharp...

CFR Polaris Relocates are designed to be used in conjunction with our new FTP risers, but they can be used on any stock Polaris sled with a flat to...

The Crowbar - the ultimate snowmobile handlebar that doesn’t require any adapters or new risers! With a non-oversized, 7/8” diameter and aerospace-...

We are proud to introduce the new CFR Signature Grip Snowmobile Handlebar Grip featuring raised logo graphics that provide superior grip and comfor...

The New CFR Hero grip is the stickiest grip on the market. The soft durometer rubber keeps your hands where you want them. Designed only to be used...

Clean up your handlebar controls and move them out of the way with this easily installed relocator.‚ The Xm and Gen4 Cluster Relocates are installe...

The CFR Crow Bar Snowmobile Handlebars are a non-oversized 7/8" diameter snowmobile handlebar from end to end. No different riser or adapter needed...

The CFR Board-Ski Direct Tunnel Mount can carry one snowboard or one pair of skis and poles on the side of the DD, iRack or Mountain Rack. It's the...

The CFR Snowboard/Pow surf bracket is a result of a direct collaboration with Jeremy Jensen at Grassroots pows surfing and CFR. Jeremy needed a rac...

The CFR Dime Bag was designed by Birkin, BC Canada based FYI designs. Tom Routh head designer/snowboard legend/sled/moto head wanted a waterproof a...

The snowmobile Snowboard rack that is tested and approved by professional snowboarders Travis Rice, Mark Carter, Mark Landvik and Helen Schettini. ...

The must have strap for your backcountry adventures, the Cheetah Factory Racing Super Strap and duct tape can pretty much fix anything. ...

The new Cheetah Factory Racing Boardski Bracket 2.0 has been totally redesigned to create the ultimate snowboard or ski carrier for your snowmobile...

The CFR 29ER is the newest bar in our 7/8" diameter line up. With an overall width of 29" and a 12 degree pullback the 29ER bar will help you navig...

The newly designed Caleb Kersterke handlebar is Caleb’s design from end to end. The Small diameter grip (SDG) area allows added grip strength to ge...

The new CFR FTP riser is designed to be used on Polaris snowmobiles with a flat top steering post. No other accessories required.

The new CFR RT bag was designed to be able to fit as much or as little as possible on the back of your snowmobile. The waterproof outer shell and w...

The new CFR Hard Enduro bar is designed to be able to take anything you can throw at it. Made from 7075 aerospace aluminum that is both strong, yet...

*Link-it-up 2.0 only* The new Pow Surf Bracket 2.0 is designed to work on our Link-It-Up Rack 2.0 and the new Summit Series Racks. The POW Surf Bra...

Works on both Polaris tunnels with channels and the new Matrix tunnel as well. When installed the plate allows the CFR Link It Up Racks to be insta...

Made for a narrow suppler handlebar bar with the smaller diameter grips feature. The Misfit has a ½” rise to dampen the bar and we added the 2mm sm...

The Crowbar Pad is for 7/8" non-oversized handlebars. Works great on the Crowbar, 29er and the new Misfit SD handlebar. The softer durometer rubber...

Features 5-1/2" tube converts stock flat style steering post to a pivot style steering post when using a pivoting style handlebar riser. Super str...

Features Made from 7075 Heat treated super Aluminum with flex technology. Strong, Light weight and built to last!*Better positioning than stock b...

The CFR Snow Scraper is a great way to scrape off unwanted snow and ice from your running boards, Snowboards or Skis.

The CFR replacement strap comes in 8" and 16" lengths and is used in all of the snowboard and ski rack carrying racks that we manufacture.‚ A 64 St...

The CFR Oversized Bar Adapter is a universal adapter that allows oversized 1 1/8" snowmobile handlebars to be fastened to your stock 7/8" Snowmobil...

Andrew had been cutting downs his Boondockers to a 29" width and asked if we could make him a custom bar so he didn't have to cut his bar down. We ...

The newly designed CFR bar pad has a sleeker, meaner and softer design to fit all CFR handlebars or any oversized large diameter handlebars. The du...

The CFR Aluminum Ratchet is custom made to take the abuse that snowmobiling throws at it.‚ These custom-made ratchets are designed to hold your sno...