Availability
Available Online or order in store
SKU 179-106320
- Does the machine have tracks, larger tires, higher A-arms, lift kit, or anything that raises the height of the machine from the original stock height?
- Is the machine lower than the stock height or has settled over time?
- Unleveled plowing causes strain on the plow system and it leads to uneven wearing of the wear bars when the blade is rotated.
- By installing the correct KFI levelling kit for your application, the proper blade angle and plowing geometry will be restored.
- Specifically designed for use with KFI UTV Tubes 179-106300
- DOES NOT work with KFI UTV Tubes 179-105635
- Designed to bolt onto your existing tube system.
- Constructed of Grade 50 Steel
- All hardware included
WITHOUT A LEVELLING KIT
If the push tubes are not level to the ground, it will cause:
- Incorrect blade attack angle
- Uneven wearing on wear bars when blade is rotated
- Added strain to plow system
WITH A LEVELLING KIT
- Guarantees ideal push tube geometry
- Correct blade attack angle
- Even wearing on wear bar when blade is rotated
- Less strain on plow system
MEASURING PIN HEIGHT
With the plow mount installed on the machine, measure from the ground to the center of the pin on the plow mount. KFI’s ideal plow pin height is between 9.5” to 11.5”. If the measurement falls below 9.5” or above 11.5”, use the chart below to decide which levelling kit is needed: