CFR

The CFR 29ER is the newest bar in our 7/8" diameter line up. With an overall width of 29" and a 12 degree pullback the 29ER bar will help you navig...

The CFR Aluminum Ratchet is custom made to take the abuse that snowmobiling throws at it.‚ These custom-made ratchets are designed to hold your sno...

The CFR Bar Pads are created to suit all CFR handlebars, as well as any handlebar with an oversized and large diameter. Its dual density foam serve...

The newly designed CFR bar pad has a sleeker, meaner and softer design to fit all CFR handlebars or any oversized large diameter handlebars. The du...

The new Cheetah Factory Racing Boardski Bracket 2.0 has been totally redesigned to create the ultimate snowboard or ski carrier for your snowmobile...

The CFR Board-Ski Direct Tunnel Mount can carry one snowboard or one pair of skis and poles on the side of the DD, iRack or Mountain Rack. It's the...

The CFR Boondocker Handlebars 2.0 are bent as an all-around Boondock, hill climbing, jump and tandeming handlebar. The 38° angulation on the end of...

The Boardski Bracket Kit can carry one snowboard or one pair of skis and poles on the side of the DD, iRack or Mountain Rack. It's the go to bracke...

Stop accidentally hitting your kill switch! Clean up your bars! Our Polaris Relocates are designed to be used in conjunction with our new FTP riser...

The Crowbar Pad is for 7/8" non-oversized handlebars. Works great on the Crowbar, 29er and the new Misfit SD handlebar. The softer durometer rubber...

The CFR Crow Bar Snowmobile Handlebars are a non-oversized 7/8" diameter snowmobile handlebar from end to end. No different riser or adapter needed...

The CFR Crow Bar Snowmobile Handlebars are a non-oversized 7/8" diameter snowmobile handlebar from end to end. No different riser or adapter needed...

The new CFR FTP riser is designed to be used on Polaris snowmobiles with a flat top steering post. Its wide stance contributes to less bar flex for...

Clean up your handlebar controls and move them out of the way with this easily installed relocator.‚ The Xm and Gen4 Cluster Relocates are installe...

The new CFR Hard Enduro bar is designed to be able to take anything you can throw at it. Made from 7075 aerospace aluminum that is both strong, yet...

The New CFR Hero grip is the stickiest grip on the market. The soft durometer rubber keeps your hands where you want them. Designed only to be used...

The newly designed Caleb Kersterke handlebar is Caleb’s design from end to end. The Small diameter grip (SDG) area allows added grip strength to ge...

The CFR Link It Up 2.0 is the newly designed flagship snowmobile rack designed in conjunction with the all-new Boardski Bracket Kit 2.0 to be the u...

Made for a narrow suppler handlebar bar with the smaller diameter grips feature. The Misfit has a ½” rise to dampen the bar and we added the 2mm sm...

The CFR Bar Pads are built to fit any oversized, large diameter handlebar or CFR handlebars. Their dual density foam provides excellent protection ...

Designed to fit snug between the bar clamps of most dirt bike oversized handlebars. The softer durometer rubber will soften the blow of an unexpect...

Andrew had been cutting downs his Boondockers to a 29" width and asked if we could make him a custom bar so he didn't have to cut his bar down. We ...

The new CFR Polaris top cap not only looks better than your stock cap but has also been trimmed down to allow 1.25” Knucks risers to be used with a...

The CFR Polaris Linq Adapter plates suit either older Polaris tunnels with accessory channels or the new Matryx tunnel with factory pre-drilled hol...

The Cheetah Factory Racing T-Post Adapter is designed to be used on Polaris snowmobiles to turn the flat steering post into a riser ready set up.

The CFR Snowboard/Pow surf bracket is a result of a direct collaboration with Jeremy Jensen at Grassroots pows surfing and CFR. Jeremy needed a rac...

*Link-it-up 2.0 only*The new Pow Surf Bracket 2.0 is designed to work on our Link-It-Up Rack 2.0 and the new Summit Series Racks. The POW Surf Brac...

The CFR replacement strap comes in 8" and 16" lengths and is used in all of the snowboard and ski rack carrying racks that we manufacture.‚ A 64 St...

The new CFR Rigid Mountain strap allows a solid grab handle for tricky maneuvers and tandem snowmobiling. The bar clamps have been slimmed down so ...

The new CFR RT bag was designed to be able to fit as much or as little as possible on the back of your snowmobile. The waterproof outer shell and w...

The CFR Snow Scraper is a great way to scrape off unwanted snow and ice from your running boards, Snowboards or Skis.

The original custom grip for regular sized bars. The CFR Signature Grip features raised logo graphics that provide superior grip and comfort while ...

The snowmobile Snowboard rack that is tested and approved by professional snowboarders Travis Rice, Mark Carter, Mark Landvik and Helen Schettini. ...

The Stealth is the next generation of bolt-on, direct-mount racks. It incorporates our new boxed-out design that creates a significantly stronger r...

The must have strap for your backcountry adventures, the Cheetah Factory Racing Super Strap and duct tape can pretty much fix anything. ...

Features Made from 7075 Heat treated super Aluminum with flex technology. Strong, Light weight and built to last!*Better positioning than stock ba...