Under $20

10 Amp charger lead extender with weather/dirt protected SAE connection system. Length: 6ft/180cm Connectors: SAE to SAE Cable rating: 16AWG (1....

Hanging hook for OptiMate 2, 3, 4, 5, 6, 7 and Lithium. Keep your OptiMate charger off the floor, hang it on the motorcycle/ATV/ PWC handlebar or c...

Premium quick connect permanent battery lead for powersport batteries, with weather protected connection system and cable. Length: 20”/50cm 1/4”/M...

10 Amp charger lead extender with weather/dirt protected SAE connection system. Length: 6ft/180cm Connectors: SAE to SAE Cable rating: 16AWG (1....

5 Amp charger lead extender with weather/dirt protected SAE connection system. Length: 6”/180cm Industry standard SAE 2-pin connectors Cable max. ...

Battery clips with “easy grip” rubber handles, custom designed to fit round, square (power sport) and flat tab posts. Length: 20”/50cm Industry st...

Split power from your permanent battery lead, create 2 fuse protected SAE outlets OR maintain 2 separate batteries from a single charger. Length: ...

Ø21mm auto socket with internal locking slots and sealing cap for an automotive plug-style USB charger or GPS adapter. Length: 20”/50cm Industry s...

Convert your older TecMate or British charger battery cable to SAE connector with weather protected sleeve and cap. Length: 6”/15cm KET 2-pole con...

Split the power from your 2.1A charger to 2 x 1A independent outputs. OptiMate USB connection system with in-line seals. Length: 12”/30cm with cab...

Adapter for Ø21mm AUTO sockets also found on Harley-Davidson and KTM motorcycles. Length: 20”/50cm Industry standard SAE 2-pin connector 10A fuse ...

Battery clips with 15A fuse, with “easy grip” rubber handles, custom designed to fit round, square (power sport) and flat tab posts. Length: 20”/5...

Split power from your permanent battery lead to create 2 SAE outlets. Length: 12”/30cm Industry standard 2-pin SAE connectors Cable max. rating: 5...

Convert your older TecMate charger or British charger brand to connect to the OptiMATE (or other SAE) permanent battery lead. Length: 6”/15cm KET/...

Power your heated apparel (jacket, gloves, etc.) fitted with a 5.5×2.5mm plug directly from your permanent battery lead. Length: 40”/100cm 1/4”/M6...

2 x Ø21mm auto sockets with internal locking slots and sealing cap for 2 x automotive plug-style USB chargers or GPS adapters. Length=12”/30cm Ind...

Swap the polarity of your SAE 2-pin connector on your standard solar panel, vehicle accessory wiring. Length: 6”/15cm Industry standard SAE 2-pin ...

5 Amp low temperature rated charger lead extender with weather/dirt protected SAE connection system. Length: 40”/100cm Industry standard SAE 2-pin...

Power 2 pcs of heated apparel (jacket, gloves, etc.) from 1 DC power socket or O-21 heated apparel battery lead. Length: 12”/30cm 2 x DC2.5mm sock...

SAE to DC2.5mm socket adapter for heated apparel that is delivered with a DC2.5mm plug. Fits the O-01 battery lead or any SAE battery lead. Length...

SAE to DC2.5mm plug adapter for heated apparel that is delivered with an SAE connector, or use this adapter with your battery charger (with SAE con...

Goggles with durable foam for maximum comfort. Fits perfectly to your face to protect your eyes from wind and dust. Maximum UV400 protection from t...

Replacement Parts

Made of PVC and polyester. One size fits all.

Biltwell Overland 2.0 Replacement Lenses Replacement Lenses for Grunt, Racer and Tri-Stripe Goggles These anti-fog lenses are injection molded on a...

Permanent Clip

Permanent Mount For Motion Series only

Made in Japan. Same quality as OEM. KEIHIN N424-21 for PJ/PWK Pilot / Slow Running Jet, PM16 / 18 / 20, Yamaha R6 99-07 Various Kawasaki / Suz...

Made in Japan Same quality as OEM

Made in Japan Same quality as OEM KEIHIN N424-25 for CV/FCR Pilot Slow running jet, FCR 28/32/33/35/37/39/41mm Harley-D Keihin BH (Non CV Type)...

Made in Japan Same quality as OEM

Slow jets for ATVs

Pilot jets for TMX carbs that have the oval type throttle valve MIKUNI N224.103 for TMX 2.5mm bleed end, early TMS/TMX OEM MX6/38 BSR CV type Hond...

Made in Japan. Same quality as OEM. MIKUNI VM22/210 for VM/TM/TMX 8 bleed hole type VM18 / VM22 / VM26-34 Flange Type Tm-24-38 (No accelerator ...

Made in Japan. Same quality as OEM. MIKUNI VM28/486 for RS/HS 2mm bleed hole type HS40 / HSR42 / 45 / 48 / RS34-40 TM33 / 36 / 40 with acceler...

FXR Pilot Nose Piece