ATV/UTV Exhausts & Carburation

Made in Japan Same quality as OEM

Slow jets for ATVs

Made in Japan. Same quality as OEM. KEIHIN N424-21 for PJ/PWK Pilot / Slow Running Jet, PM16 / 18 / 20, Yamaha R6 99-07 Various Kawasaki / Suz...

Mikuni Main Jet Kits

Fuel Filters  

ITL Cable Idle Adjusting Screw Mikuni

Aluminum. Includes the flange and the gasket

Contains 68 pieces.

Double wire, self-tensioning. Zinc plated. 5/16" O.D. 3/8" O.D. 7/16" O.D. Works on fuel or vacuum lines

Vent Line 1/8” ID X 1/4” OD

Black line with neoprene outer cover to resist grease and oil. Available in plain or reinforced rubber. Sold in 25 foot roll.

Oil Injection Line

Helix fuel line is made from premium polyurethane, providing superior resistance to abrasions, kinking, tearing, oxidation and chemical damage. Thi...

Fuel Line 5/16” ID X 7/16” OD

Helix Fuel Line 3/16” ID X 5/16” OD

25-foot rolls. A - Flexible transparent vinyl tubing. 2mm thickness. B - Flexible black vinyl tubing. 2mm thickness. C - Reinforced vinyl tubing, n...

For any carburetor system. Stay really soft at any temperature. 25’ and 100’ rolls. 3 sizes available.

High-pressure transparent yellow, polyurethane, nylon interbraid, 200 psi max pressure, transparent premium polyurethane 85-durometer tubing provid...

Helix Stainless Steel Spiral Hose

Aluminum fuel filters with cleanable brass element.

Fuel Filters BRP/CAN-AM & POLARIS

For OEM replacement.

Kit 1 Contains 1 = Gasket Packing (43049-1017) 1 = O-Ring, Tap Lever (92055-1111) 1 = O-Ring Tap Assy. (92009-1112) 2 = Screws 3 X 5mm (92009-1123...

ITL Fuel Valves

The inline fuel valves are ideal for use on ATVs or other vehicles where an inline fuel petcock is necessary

Direct OE-style replacement 3-position petcock (off, reserve and main) Made in Taiwan

Mikuni type DF44-211, DF44-211D, DF44-227

Mikuni type DF44-211, DF44-211D, DF44-227

K&N Inline Fuel Pumps provide premium quality fuel system hardware with a universal design that fits a wide variety of applications. Compatible...

Throttle cap cable adjuster screw Fits Motion Pro TORS eliminator carb cap for Mikuni carbs Not for use with stock carb cap Pack of 5 in polybag

Made in Japan Same quality as OEM

Made in Japan Same quality as OEM KEIHIN N424-25 for CV/FCR Pilot Slow running jet, FCR 28/32/33/35/37/39/41mm Harley-D Keihin BH (Non CV Type)...

Made in Japan. Same quality as OEM. MIKUNI VM28/486 for RS/HS 2mm bleed hole type HS40 / HSR42 / 45 / 48 / RS34-40 TM33 / 36 / 40 with acceler...

Made in Japan. Same quality as OEM. MIKUNI VM22/210 for VM/TM/TMX 8 bleed hole type VM18 / VM22 / VM26-34 Flange Type Tm-24-38 (No accelerator ...