All

High strength 12-strand dyneema® synthetic fiber rope has a higher breaking strength than that of steel cable and it is lighter. It won’t bind up o...

High strength 12-strand dyneema® synthetic fiber rope has a higher breaking strength than that of steel cable and it is lighter. It won’t bind up o...

Specifications: Designed to be used as an extension for your pre-existing winch cable. Synthetic fiber rope has a higher breaking strength than tha...

This mount converts your stock ATV winch mount that is part of your ATV frame to work with the 2-hole 3.100” bolt pattern winches listed below. Des...

This 2500 lb ATV Assault Series winch features metal/steel cable, a dynamic and mechanical braking system, water-resistant seals to keep the elemen...

This 2500 lb ATV Assault Series winch features synthetic cable, split cable hook stopper, a dynamic and mechanical braking system, water-resistant ...

SPECIFICATIONS: Heavy-duty steel receiver Specifically designed for use in ATV/UTV recovery Converts any 2” receiver into a tow or anchor point Ho...

High strength 12-strand dyneema® synthetic fiber rope has a higher breaking strength than that of steel cable and it is lighter. It won’t bind up o...

This 3500 lb ATV Assault Series winch features metal/steel cable, a dynamic and mechanical braking system, water-resistant seals to keep the elemen...

This 3500 lb ATV Assault Series winch features synthetic cable, split cable hook stopper, a dynamic and mechanical braking system, water-resistant ...

This mount will convert the 3.00” X 4.875” Standard 4-bolt mounting pattern that is integrated in some OEM frames and winch mounts and allows it to...

Whether it’s on a winding trail, plowing snow or deep in the mud, a reliable winch is the most important accessory a rider can have. Equip your ATV...

Whether it’s on a winding trail, plowing snow or deep in the mud, a reliable winch is the most important accessory a rider can have. Equip your ATV...

Model: A3000 ATV Series Rated Line Pull: 3000 lb Motor: 12V DC, 1.5 hp Permanent Magnet Gear Ratio: 171:1 Gear/Transmission: All-metal Planetary G...

Have you ever been plowing snow sitting inside your cab and needed to rotate the blade, but you didn’t want to get out into the cold to rotate it? ...

KFI Winch Mount for the following Arctic Cat UTVs: 2012-2019 Wildcat 1000 2013-2019 Wildcat 4 1000 Below are the Modular components that can be pur...

This 5000 lb ATV/UTV Assault Series winch features synthetic cable, cable hook stopper, a dynamic and mechanical braking system, water-resistant se...

Replacement contactor for the Assault winches: 179-AS50 / 179-AS50w. Requires correct switch to operate contactor Requires switch with four wires, ...

Specifications: Aluminum material Designed to work with the synthetic cables Eliminates cable pinch caused by roller fairleads and synthetic cable...

Uses (2) 3/8” pins to mount 1/4” Grade 50 attachment bracket 40-50% more lift height than the competition Works with Cycle Country ATV Mid-Mounts ...

KFI’s new Clamshell Mini Rocker for ATVs. This new rocker switch uses KFI’s dependable rocker switch that is now dressed in a plastic bessel that i...

Works with KFI ATV push tubes 179-105000 Will work universally on most ATVs Use with up to 60” KFI blades Shot blasted before powder coating Powde...

Works with ATV Tubes 179-105000 Constructed of heavy-duty 3/16” or 1/4” grade 50 steel Extends ATV blade 14.0” Or 12.67” (Two-position) Shot blast...

The ATV Push Tube Extension was designed to extend the ATV push tubes for machines with tires a little larger or in the case where clearance betwee...

The ATV Push Tube Stiffener was designed to bolt around the existing ATV Tubes (179-105000) to make them stronger. This allows the tube to handle l...

Specifications: 100% MADE IN USA Made of 3/16” Grade 50 steel and 3/8” thick at ball mounting location Takes all 3/4” shank balls Required OEM Spe...

The KFI Hybrid Mount System is a unique mounting system in the fact that it mounts to the frame just behind the wheels, instead of on the front or ...

Handheld 14’ Corded Remote for those situations when you need to control your winch from a distance. This compact high quality remote offers a more...

Heavy-duty electric contactor protects your ATV’s electrical system and allows the winch to be controlled by a relay switch. Direct Replacement Con...

KFI Winch Mount for the following Arctic Cat UTVs: 2012-2019 Wildcat 1000 2013-2019 Wildcat 4 1000 Below are the Modular components that can be pur...

Replaces standard winch fairlead during plow season. Provides larger 2-1/8” diameter roller for smoother cable movement when plowing compared to s...

FOR ALL WIDE UTV 4-hole mounted winches (see list below). This replacement grill is designed to work with our Mount 179-100560 ONLY (not included)....

Specifications: 12 inches long Heavy duty 3200 lb rating

The KFI 48”/60” Sno-Devil is designed from the ground up to have all the best features in one complete simple package that will work with about 90%...

If you don’t want all the added weight from our heavier steel constructed blades and have a smaller ATV, you can now conquer the snow with the KFI ...

This Split Cable Hook Stopper is for the ATV and UTV winch. It weighs 4 oz and It is 2 5/8 inches wide and 1 3/4 inches thick. This KFI Split Cable...